Removal Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Use compressed air to remove debris from the camshaft position actuator solenoid valve solenoid and surrounding cavities.
- Disconnect the camshaft position actuator solenoid valve solenoid electrical connector.
- Remove the camshaft position actuator solenoid valve solenoid to engine front cover retaining bolt (1).
- Remove the camshaft position actuator solenoid valve solenoid (2) from the engine front cover.
WARNING:
Refer to Safety Glasses Warning .