LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Engine Controls And Fuel - 3.6L (LGX LF4) - Repair Instructions) >> Repair Instructions >> Camshaft Position Actuator Locating Pin Control Valve Replacement (Bank 2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Position Actuator Locating Pin Control Valve, Bolt, Electrical Connector And Seal
    GM4143693Courtesy of GENERAL MOTORS COMPANY
  1. Install Camshaft Position Actuator Solenoid Valve Seal (4). Install a NEW seal as necessary. Refer to Engine Front Cover Assemble (LF4)Engine Front Cover Assemble (LGX)
  2. Install Camshaft Position Actuator Locating Pin Control Valve (3)
  3. CAUTION:

    Refer to Fastener Caution .

  4. Install and tighten Camshaft Position Actuator Locating Pin Control Valve Bolt (2) to 10 N.m (89 lb in)
  5. Connect Electrical Connector (1)
  6. Fig 2: Retainers And Engine Wiring Harness
    GM4143526Courtesy of GENERAL MOTORS COMPANY
  7. Reposition Engine Wiring Harness (2)
  8. Install Retainers (1) (Qty: 2)
  9. Install Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement (LGX) Air Cleaner Outlet Duct Replacement (LF4)