Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Install Air Cleaner Outlet Duct (3)
- Engage Retainer Spring (2) @ Air Cleaner Outlet Duct (3)
- Install Air Cleaner Outlet Duct Clamp (1) @ Air Cleaner Outlet Duct (3) 4 N.m (35 lb in)
- Install Charge Air Bypass Valve Hose (2) @ Air Cleaner Outlet Duct (3)
- Install Charge Air Bypass Valve Hose Clamp (1) @ Charge Air Bypass Valve Hose (2) 4 N.m (35 lb in)
- Install Air Cleaner Outlet Duct Adapter (2) @ Air Cleaner Outlet Duct (3)
- Install Air Cleaner Outlet Duct Adapter Bolt (1) @ Air Cleaner Outlet Duct Adapter (2) (Qty: 2) 4 N.m (35 lb in)
CAUTION:
Refer to Fastener Caution .
NOTE:
Ensure the outlet duct is fully seated to the mating surfaces before clamping. Verify that the cuff is not rolled under.