Engine Oil Pressure Sensor and/or Switch Replacement (LF4)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (Front Wheel Drive)Front Compartment Lower Noise Shield Replacement (All Wheel Drive) . |
|
| 1 | Engine Oil Pressure Sensor and/or Switch
CAUTION:
Refer to Component Fastener Tightening Caution . Procedure Disconnect the oil pressure sensor electrical connector. Tighten 20 N.m (15 lb ft) Special Tools EN-41712 Oil Pressure Switch Socket For equivalent regional tools, refer to Special Tools (LGX)Special Tools (LF4) . |