Automatic Transmission Flex Plate Replacement (LGX)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Transmission Replacement (M5N with LGX Engine) Special Tools EN 46106 Flywheel Holding Tool Equivalent regional tools:Special Tools (LGX) . |
|
| 1 | Automatic Transmission Flex Plate Fastener (Qty: 8)
CAUTION:
Refer to Fastener Caution .
CAUTION:
This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component. Procedure Install NEW bolts. Do NOT reuse old bolts. Tighten
NOTE:
NEW bolts must be used whenever removing the automatic transmission flex plate. |
| 2 | Automatic Transmission Flex Plate Procedure Automatic Transmission Flex Plate Cleaning and Inspection . |