LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2534 or P2535: Ignition On/Start Switch >> Conditions for Running the DTC

Conditions for Running the DTC

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

P2534 

The control module ignition voltage signal is valid, with the ignition ON.

P2535 

The control module ignition voltage signal is valid, with the ignition OFF.

scientia non olet · About LEMON Manuals