Circuit/System Verification
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the KR73 Ignition Main Relay and KR146 Exhaust Flow Control Valve Relay click ON and OFF when commanding the Run/Crank Relay On and Off with a scan tool.
- If the KR73 Ignition Main Relay or KR146 Exhaust Flow Control Valve Relay do not click ON and OFF
Refer to Circuit/System Testing.
- If the KR73 Ignition Main Relay and KR146 Exhaust Flow Control Valve Relay click ON and OFF
- If the KR73 Ignition Main Relay or KR146 Exhaust Flow Control Valve Relay do not click ON and OFF
- All OK.