Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the front differential carrier. Refer to Front Axle Lubricant Replacement .
- Remove the right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Right Side .
- Lower the drivetrain and front suspension frame enough to access the carrier side cover bolts. Refer to Drivetrain and Front Suspension Frame Removal and Installation (V-Series)Drivetrain and Front Suspension Frame Removal and Installation (Non V-Series) .
- Remove the carrier side cover bolts (1).
- Using the appropriate tool in the pry tabs, remove the carrier side cover (2).
- Remove the O-ring (1) from the carrier side cover (2).