LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Engine Controls And Fuel - 2.0L (LTG) Or 2.5L (LCV) - DTC P0010 To DTC P0324) >> Diagnostic Information and Procedures >> DTC P0106: Manifold Absolute Pressure (MAP) Sensor >> Typical Scan Tool Data

Typical Scan Tool Data

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
MAP Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine operating in closed loop, idling, and accessories OFF
Parameter Normal Range:  12-103 kPa (1.7-14.9 PSI)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 104 kPa (15.1 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 104 kPa (15.1 PSI)*
Low Reference - 80-103 kPa (11.6-14.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.
MAP Sensor, if equipped with Turbocharger

Circuits Short to Ground Open Short to Voltage
Operating Conditions:  Engine running at various operating conditions
Parameter Normal Range:  12-225 kPa (1.7-32.6 PSI) (varies with altitude)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)*
Low Reference - 255 kPa (36.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.