LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Engine Controls And Fuel - 2.0L (LTG) Or 2.5L (LCV) - DTC P0010 To DTC P0324) >> Diagnostic Information and Procedures >> DTC P0097, P0098, or P0099: Intake Air Temperature (IAT) Sensor >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Multifunction Intake Air Sensor

  1. Test the IAT Sensor 2 by varying the sensor temperature while monitoring the air temperature with a thermometer. Compare the readings with the scan tool IAT Sensor 2 parameter. The values should be within 5%.
    • If not within the specified range 

      Replace the B75C Multifunction Intake Air Sensor.

    • If within the specified range 
  2. All OK.
scientia non olet · About LEMON Manuals