Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series) .
- Install a drain pan under the vehicle.
- Disconnect the hoses from the differential. Refer to Limited Slip Differential Clutch Pipe Connector Disconnection and Connection .
- Remove the differential clutch pump bracket nuts (1) and the rear axle differential lock control actuator assembly (2).