LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Electronic Suspension Rear Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (V-Series)
    2. Fig 1: Electronic Level Sensor & Electrical Connector
    GM2868758Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the electrical connector (2) from the electronic level sensor (1).
  3. Remove the right side rear suspension lower control arm cover. Rear Suspension Lower Control Arm Cover Replacement
    4. Fig 2: Level Sensor & Related Components
    GM2868780Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the level sensor link (1) from the lower control arm (4).
  5. Loosen the level sensor nut (3).
  6. Remove the level sensor (2) from the vehicle.
scientia non olet · About LEMON Manuals