LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions >> Repair Instructions >> Engine Wiring Harness Oxygen Sensor Lead Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM4373918

    Engine Wiring Harness Oxygen Sensor Lead Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Engine Wiring Harness Oxygen Sensor Lead Clip Bolt (1) - Install and tighten 9 N.m (80 lb in)
  3. GM4373897

    Retainer (1) - Install (Qty: 2)

  4. Front Bumper Fascia - Install - Front Bumper Fascia Replacement
scientia non olet · About LEMON Manuals