X901 License Lamp Harness To Liftgate Harness (UVC)

-
Connector Part Information Harness Type: License Lamp OEM Connector: 6098-8447 Service Connector: Service by Harness Description: 10-Way F	Connector Part Information Harness Type: Liftgate OEM Connector: 13595576 Service Connector: Service by Harness Description: 10-Way M 1.2 Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-16 (LT GN)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	Not Required	J-35616-17 (LT GN)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	-	-	-	-	-	-	1	-	-	-	-	-
2	-	-	-	-	-	-	-	-	-	-	-	-
3	0.5	BK	1350	I	-	Ground	3	0.5	BK	1350	II	-
4	0.5	GN/YE	6846	I	-	Rear License Lamp Control	4	0.5	GN/YE	6846	II	-
5	0.35	BK	2150	I	-	Ground	5	0.35	BK	2150	II	-
6	0.35	BARE	6974	I	-	Camera Low Reference	6	0.35	BARE	6974	II	-
7	0.35	GY/YE	6972	I	-	Camera Signal 2 +	7	0.35	GY/YE	6972	II	-
8	0.35	WH/BU	6973	I	-	Camera Signal 2	8	0.35	WH/BU	6973	II	-
9	-	-	-	-	-	-	9	-	-	-	-	-
10	0.35 0.35	VT/GN BN/RD	1339 2063	I I	TNA+UVC UVH	Run/Crank Ignition 1 Voltage 6V Reference	10	0.35 0.35	VT/GN BN/RD	1339 2063	II II	TNA+UVC UVH