LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. GM4430512

    Front Side Door Sill Garnish Molding (1) - Remove - Front Side Door Sill Garnish Molding Replacement

  2. GM4381436

    Instrument Panel Insulator-Left Side (2) - Remove - Instrument Panel Insulator Replacement - Left Side 

  3. GM4403805

    Instrument Panel Cluster Trim Plate (1) - Remove - Instrument Panel Cluster Trim Plate Replacement 

  4. GM4421600

    Instrument Panel Lower Airbag - Driver Side (2) - Remove - Instrument Panel Lower Airbag Replacement - Driver Side

  5. GM4381679

    Instrument Panel Outer Trim Cover - Left Side (1) - Remove - Instrument Panel Outer Trim Cover Replacement 

  6. GM4393979

    Front Floor Console Trim Plate (1) - Remove - Front Floor Console Trim Plate Replacement 

  7. GM4406520

    Pull down the hood primary latch release cable handle. (1)

  8. Disconnect the data link connector. (2)
  9. Instrument Panel Knee Bolster Bolt (3) - Remove (Qty: 8)
  10. GM4406523

    Use a plastic trim tool if necessary.

  11. Instrument Panel Knee Bolster (1) - Remove
  12. Disconnect all electrical connectors.
  13. Transfer components as necessary.
scientia non olet · About LEMON Manuals