Stator Shaft Support Removal
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
| 1 |
Turbine Shaft O-ring Seal
NOTE:
Remove and DISCARD the O-ring seal.
|
| 2 |
Stator Shaft Support Bolt M8 x 35 mm (Qty: 9) |
| 3 |
Stator Support Shaft Assembly |