LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Automatic Transmission - 8L45 (M5N M5T) Or 8L90 (M5U) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Disassemble >> 2-3-4-6-8 Clutch Piston Removal

2-3-4-6-8 Clutch Piston Removal

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 2-3-4-6-8 Clutch Piston
GM3681738Courtesy of GENERAL MOTORS COMPANY
2-3-4-6-8 Clutch Piston Removal

Callout Component Name
1 2-3-4-6-8 Clutch Piston Dam Retaining Ring
NOTE:

Discard the retaining ring, it is not reusable.

Special Tools

  • DT-35512  Bearing Installer
  • DT-50900  Clutch Travel Support Fixture
  • DT-50902  Adjustable Clutch Spring Compressor

For equivalent regional tools, refer to Special Tools .
2 2-3-4-6-8 Clutch Piston Dam
Special Tools 
DT-50905  Clutch Air Travel Adapter
For equivalent regional tools, refer to Special Tools .
3 2-3-4-6-8 Clutch Piston Dam Outer Seal
CAUTION:

Refer to Seal Reuse Caution .
4 2-3-4-6-8 Clutch Piston Dam Inner Seal
CAUTION:

Refer to Seal Reuse Caution .
5 2-3-4-6-8 Clutch Piston Return Spring
NOTE:

Note the orientation of the spring for assembly.
6 2-3-4-6-8 Clutch Piston
7 2-3-4-6-8 Clutch Piston Seal
CAUTION:

Refer to Seal Reuse Caution .
scientia non olet · About LEMON Manuals