Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission fluid filter (4). Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (Rear Wheel Drive) Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (All Wheel Drive)
- Remove the auxiliary fluid accumulator. Auxiliary Fluid Accumulator Replacement
- Remove the transmission fluid baffle (2). Transmission Fluid Baffle Replacement
- Remove the transmission control wiring harness. Transmission Control Wiring Harness Replacement (M5U, M5T) Transmission Control Wiring Harness Replacement (M5N)
- Remove the manual shaft detent lever spring retaining bolt (1) and the manual shaft detent lever spring (2).
- Disconnect the manual valve (1) from the manual shift shaft position switch assembly linkage (2).
-
Remove the transmission fluid pump driven sprocket (1). Refer to transmission fluid baffle and driven sprocket in Control Valve Assembly and Transmission Wiring Harness Removal .
- Using DT-48285 Valve Body Torx Plus Socket remove the valve body bolts (1,2) and the vale body assembly (3) from the transmission.