Case Extension Assembly Installation

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Case Extension Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Automatic Transmission Case Extension Seal NOTE: The seal is reusable, inspect the seal and replace if damaged.
2	Automatic Transmission Case Extension Assembly NOTE: Ensure the park pawl is not engaged.
3	Automatic Transmission Case Extension Bolt M10 x 40 (Qty: 6) CAUTION: Refer to Fastener Caution . Procedure Tighten the bolts in the sequence shown. Tighten the bolts a first pass to 20 N.m (15 lb ft) Tighten the bolts a final pass to 55 Degrees