Range Selector Lever Cable Bracket Replacement (M5U)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Range Selector Lever Cable Bracket Replacement (M5U)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Apply the park brake. Shift the transmission into neutral. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle (ATS-V) . Disconnect the range selector lever cable from the bracket and reposition out of the way. Refer to Range Selector Lever Cable Replacement .
1	Transmission Range Selector Cable Bracket Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Transmission Range Selector Cable Bracket

Callout

Component Name

Preliminary Procedures

Apply the park brake.
Shift the transmission into neutral.
Raise and support vehicle. Refer to Lifting and Jacking the Vehicle (ATS-V) .
Disconnect the range selector lever cable from the bracket and reposition out of the way. Refer to Range Selector Lever Cable Replacement .

Transmission Range Selector Cable Bracket Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
22 N.m (16 lb ft)

Transmission Range Selector Cable Bracket