Instrument Panel Lower Trim Panel Insulator Replacement (Left Side)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Lower Trim Panel Insulator (Left Side)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Refer to Front Floor Console Extension Panel Replacement - Left Side
1	Instrument Panel Insulator Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Lower Trim Panel Insulator - Left Side Procedure Use a flat bladed plastic trim tool. Disconnect the electrical connector. Unclip the hood release handle from the insulator panel.

Callout

Component Name

Preliminary Procedure
Refer to Front Floor Console Extension Panel Replacement - Left Side

Instrument Panel Insulator Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Instrument Panel Lower Trim Panel Insulator - Left Side

Procedure

Use a flat bladed plastic trim tool.
Disconnect the electrical connector.
Unclip the hood release handle from the insulator panel.