Engine Compartment Lower Noise Shield Replacement (Front Wheel Drive)
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle (ATS) . |
|
| 1 | Front Compartment Lower Noise Shield Push-In Retainer (Qty: 6) |
| 2 | Front Compartment Lower Noise Shield Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution Tighten 2.5 N.m (22 lb in) |
| 3 | Front Compartment Lower Noise Shield Bolt (Qty: 9) Tighten 5 N.m (44 lb in) |
| 4 | Front Compartment Lower Noise Shield |