Airbag Front Passenger Presence Module Replacement

Fig 1: Airbag Front Passenger Presence Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: To avoid personal injury, perform a preload test on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction. Preliminary Procedure Front Seat Cushion Cover and Pad Replacement
1	Airbag Front Passenger Presence Module Retainer (Qty: 2)
2	Airbag Front Passenger Presence Module Procedure Unhook the module from the bracket on the underside of seat frame and push up through seat pan. Disconnect the electrical connector and remove the sensor and module from the seat pan. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

WARNING:

To avoid personal injury, perform a preload test on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction.

Preliminary Procedure Front Seat Cushion Cover and Pad Replacement

Airbag Front Passenger Presence Module Retainer (Qty: 2)

Airbag Front Passenger Presence Module

Procedure

Unhook the module from the bracket on the underside of seat frame and push up through seat pan.
Disconnect the electrical connector and remove the sensor and module from the seat pan.
Perform the necessary programming and setup procedure:Control Module References