Front Wheel Drive Shaft Seal Replacement - Right Side

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Front Wheel Drive Shaft Oil Seal - Right Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the intermediate drive shaft. Refer to Front Wheel Drive Intermediate Shaft Replacement .
1	Right Front Wheel Drive Shaft Oil Seal For seal removal use J 6125-1B slide hammer with J 23129 universal seal remover. For seal installation use J 8092 driver handle with J 46629-A axle seal installer. Special Tools J 6125-1B Slide Hammer J 8092 Driver Handle J 23129 Universal Seal Remover J 46629-A Axle Seal Installer

Callout

Component Name

Preliminary Procedures

Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the intermediate drive shaft. Refer to Front Wheel Drive Intermediate Shaft Replacement .

Right Front Wheel Drive Shaft Oil Seal

For seal removal use J 6125-1B slide hammer with J 23129 universal seal remover.
For seal installation use J 8092 driver handle with J 46629-A axle seal installer.

Special Tools