No Second and Sixth Gear
WARNING: This page is about a different variant/trim than selected.
| Checks |
Causes |
| 2-6 Clutch Assembly |
- Inspect for damaged or worn 2-6 clutch plates (445-447).
- Inspect for damaged, worn, broken, improper surface finish or sheared splines on the 2-6 clutch backing plate (448).
|
| Reaction Carrier Assembly (467) |
- Inspect for stripped or sheared splines on the input ring gear.
- Inspect for disengaged or broken input ring gear retainer.
|
| Case Cover Assembly (403) |
- Inspect for damaged or broken 2-6 clutch piston (405) and piston seals damaged, worn or delaminating.
- Inspect for broken or binding 2-6 clutch piston return spring (406).
- Inspect for broken or disengaged 2-6 clutch piston return spring retainer (407).
- Inspect for damaged, worn or improper surface finish in the piston bore (403).
|
| Case Assembly (51) |
Inspect for stripped or sheared splines (51). |