Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
Ignition voltage is between 8.6-32 V.
High side driver is enabled.
Output speed is 36 RPM or greater, or the accelerator pedal position is 0.5 % or greater.
Throttle position signal is valid.
Engine speed is 400-7,500 RPM for 5 s.
Transmission fluid temperature is -6.7°C (20°F) or greater.