Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0815 - Condition 1
TCM detects an upshift request for 1 s in Park or Neutral.
P0815 - Condition 2
TCM detects an upshift request for 10 min in any forward range.
P0816 - Condition 1
TCM detects a downshift request for 1 s in Park or Neutral.
P0816 - Condition 2
TCM detects a downshift request for 10 min in any forward range.
P0826
TCM detects an invalid voltage on the Tap up/Tap down signal circuit for 1 min.