Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0711
- DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0658, P0668, P0669, P06AD, P06AE, P0712, P0713, P0716, P0717, P0722, P0723, P0962, P0963, P0966, P0967, P0970, P0971, P215C, P2720, P2721, P2729, or P2730 is not set.
- Engine speed is 400-7,500 RPM for 5 s.
- Ignition voltage is greater than 8.5 V.
- Brake torque is not active.
- Engine torque signal is valid.
- Throttle position signal is valid.
P0712 and P0713
- DTC P0716, P0717, P0722, or P0723 is not set.
- Engine speed is 400-7,500 RPM for 5 s.
- Ignition voltage is greater than 8.5 V.