Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel tank. Refer to Fuel Tank Replacement (AWD) Fuel Tank Replacement (FWD) .
- Disconnect the electrical connector (1).
- Disconnect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service .
- Using the CH-48482 wrench, remove the cam lock ring (1) by turning counterclockwise.
- Partially raise the secondary fuel pump module and disconnect the crossover tube (1) by squeezing the plastic retaining tabs (2).
- Remove the secondary fuel tank module (1) and the O-ring (2).
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .