LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 3.6L (LFX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube O-Ring
    GM1583980Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW O-ring on the oil level indicator tube.
    2. Fig 2: Oil Level Indicator Tube
    GM2213526Courtesy of GENERAL MOTORS COMPANY
  2. Install the oil level indicator and tube (2) by sliding the tube down through the lower crankcase hole.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the oil level indicator tube bracket bolt (1) and tighten to 10 N.m (89 lb in).
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals