LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 3.6L (LFX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Engine Oil Level Switch, Seal & Clip
    GM2736533Courtesy of GENERAL MOTORS COMPANY
  1. Install the NEW engine oil level switch seal (1).
  2. Install the engine oil level switch (3).
  3. Install the engine oil level switch bolts (2) and tighten to 10 N.m (89 lb in).
  4. Install NEW engine oil level switch clip (4).
    5. Fig 2: Oil Suction Pipe Seal
    GM2736537Courtesy of GENERAL MOTORS COMPANY
  5. Inspect the oil suction pipe seal (1) and replace if damaged.
    6. Fig 3: Oil Suction Pipe Bolts
    GM2736534Courtesy of GENERAL MOTORS COMPANY
  6. Install the oil suction pipe (2).
  7. Install the oil suction pipe bolts (1) and tighten to 10 N.m (89 lb in).
    8. Fig 4: Oil Pan Scraper
    GM2736535Courtesy of GENERAL MOTORS COMPANY
  8. Install the oil pan scraper (1).
  9. Install the oil pan scraper bolts (2) and tighten to 10 N.m (89 lb in).
  10. Install the oil pan. Refer to Oil Pan Replacement .
scientia non olet · About LEMON Manuals