LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 3.6L (LFX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Camshaft Cover Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the ignition coils. Refer to Ignition Coil Replacement - Bank 1
  2. Disconnect and remove the engine harness from the camshaft cover.
    3. Fig 1: Right Camshaft Cover & Bolts
    GM902873Courtesy of GENERAL MOTORS COMPANY
  3. Remove the right camshaft cover bolts.
  4. Remove the right camshaft cover from the right cylinder head.
  5. Clean the mating surfaces of the cylinder head and the camshaft cover. Refer to Camshaft Cover Cleaning and Inspection
    6. Fig 2: Spark Plug Tube Seal Guides & Caps
    GM1306485Courtesy of GENERAL MOTORS COMPANY
  6. Install the EN-46101  guide onto the spark plug tubes of the right cylinder head.
scientia non olet · About LEMON Manuals