Left Cylinder Head Camshaft Cover Face
WARNING: This page is about a different variant/trim than selected.
Left Cylinder Head Camshaft Cover Face
| Hole Location | Thread Size | Drill | Counter Bore Tool | Stop Collar | Tap | Driver | Insert | Drill Depth (Maximum) | Tap Depth (Minimum) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| J 42385- | MM | (IN) | MM | (IN) | |||||||
| 1 | M6 x 1.0 | 201 | 202 | N/A | 203 | 204 | 205 | 22.5 | 0.8858 | 18.0 | 0.7087 |
| 2 | M6 x 1.0 | 201 | 202 | N/A | 203 | 204 | 205 | THRU | THRU | ||
| 3 | M6 x 1.0 | 701 | N/A | N/A | 203 | 204 | 205 | 28.5 | 1.1220 | 24.0 | 0.9449 |
| 4 | M20 x 1.5 | 715 | 716 | N/A | 717 | 718 | 719 | 25.0 | 0.9842 | 17.0 | 0.6693 |