LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Mechanical - 3.6L (LFX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft Rear Oil Seal and Housing Removal

Crankshaft Rear Oil Seal and Housing Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Crankshaft Rear Oil Seal Housing Bolts
    GM1306175Courtesy of GENERAL MOTORS COMPANY
  1. Remove the crankshaft rear oil seal housing bolts.
    2. Fig 2: Pry Points On Edge Of Crankshaft Rear Oil Seal Housing
    GM1492611Courtesy of GENERAL MOTORS COMPANY
  2. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  3. Use the pry points located at the edge of the crankshaft rear oil seal housing to separate the RTV sealant.
    4. Fig 3: Crankshaft Rear Oil Seal Housing
    GM1306173Courtesy of GENERAL MOTORS COMPANY
  4. Remove and discard the crankshaft rear oil seal housing.
scientia non olet · About LEMON Manuals