LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Mechanical - 3.6L (LFX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Removal - Right Side

Camshaft Removal - Right Side

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Markings On Bearing Caps
    GM1306311Courtesy of GENERAL MOTORS COMPANY
  1. Observe the markings on the bearing caps. Each bearing cap is marked in order to identify its location. The markings have the following meanings:
    • The raised feature must always be oriented toward the center of the cylinder head.
    • The I indicates the intake camshaft.
    • The E indicates the exhaust camshaft.
    • The number indicates the journal position from the front of the engine.
    2. Fig 2: Camshaft Bearing Caps And Bolts
    GM946234Courtesy of GENERAL MOTORS COMPANY
  2. Remove the camshaft bearing cap bolts.
  3. Remove the camshaft bearing caps.
    4. Fig 3: Camshafts
    GM946242Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    Mark the camshafts upon removal to ensure installation is in the correct position.

  4. Remove the camshafts.
scientia non olet · About LEMON Manuals