LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Terrain SL, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission - 6T70 (M7U M7W) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Torque Converter and Differential Housing Assembly Assemble >> Transfer Drive Gear Assembly Installation

Transfer Drive Gear Assembly Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Transfer Drive Gear Assembly And Tightening Sequence
GM2181504Courtesy of GENERAL MOTORS COMPANY
Transfer Drive Gear Assembly Installation

Callout Component Name
1 Drive Sprocket Thrust Washer
2 Front Differential Transfer Drive Gear Support Assembly
3 Front Differential Transfer Drive Gear Support Bolt M8 x 25 (Qty: 9)
CAUTION:

Refer to Fastener Caution .


Procedure 
Tighten in sequence shown.
Tighten 
10 N.m (89 lb in) plus 50 degrees ± 4 degrees.
Special Tools: 
EN 45059  Angle Meter
For equivalent regional tools, refer to Special Tools .
4 Front Differential Carrier Baffle
5 Front Differential Carrier Baffle Bolt M6 x 25
Tighten 
12 N.m (106 lb in).
scientia non olet · About LEMON Manuals