X904 License Lamp Harness to Liftgate Harness

Connector Part Information Harness Type: License Lamp OEM Connector: 7283-9040-30 Service Connector: Service by Harness - See Part Catalog Description: 10-Way F 0.64 YESC Kaizen Series (BK)	Connector Part Information Harness Type: Liftgate OEM Connector: 7282-9040-30 Service Connector: Service by Harness - See Part Catalog Description: 10-Way M 0.64 Kaizen Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-64B (LT BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	Not Required	J-35616-65B (LT BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	0.35	BK	2550	I	-	Lift Gate Object Sensor Low Reference Ground	1	0.35 0.35	VT/WH BK	5801 2550	II	TB5 -TB5
2	0.35	GY	5797	I	-	Rear Closure Handle Switch Open Signal	2	0.35	GY	5797	II	-
3	0.35	BARE	6974	I	UVC	Camera Low Reference	3	0.35	BARE	6974	II	UVC
4	0.35	BK/WH	1651	I	UVC	Signal Ground	4	0.35	BK/WH	1651	II	UVC
5	0.35	L-BU	6973	I	UVC	Camera Signal 2	5	0.35	L-BU	6973	II	UVC
6	0.35	PK	6972	I	UVC	Camera Signal 2 +	6	0.35	PK	6972	II	UVC
7	0.35	GN/RD	6846	I	-	Rear License Lamp Control	7	0.35	GN/RD	6846	II	-
8	0.35	BK	2550	I	-	Ground	8	0.35	BK	2550	II	-
9	0.35	L-GN	24	I	UVC	Backup Lamp Control	9	0.35	L-GN	24	II	UVC
10	0.35	PK	1339	I	UVC	Run/Crank Ignition 1 Voltage	10	0.35	PK	1339	II	UVC