Air Inlet Grille Panel Extension Replacement (Equinox)

Fig 1: Air Inlet Grille Panel Extension (Equinox)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Open and support hood in order to access the air inlet grille panel extension.
1	Air Inlet Grille Panel Extension Procedure Release the tabs securing the air inlet grille panel extension to the rear upper fender flange and air inlet grille. Disengage the rearward edge of the extension from under the top edge of the fender flange. Remove the extension from the vehicle.

Callout

Component Name

Preliminary Procedure
Open and support hood in order to access the air inlet grille panel extension.

Air Inlet Grille Panel Extension

Procedure

Release the tabs securing the air inlet grille panel extension to the rear upper fender flange and air inlet grille.
Disengage the rearward edge of the extension from under the top edge of the fender flange.
Remove the extension from the vehicle.