LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2016 >> Acadia SLT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement (Acadia)

Front Fender Replacement (Acadia)

Fig 1: Front Fender (Acadia)
GM2869299Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Acadia) .
  2. Remove the front wheelhouse rear liner. Refer to Front Wheelhouse Rear Liner Replacement (Acadia, Enclave, Traverse) .
  3. Remove the headlamp assembly. Refer to Headlamp Replacement (Acadia) .
  4. Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement (Acadia) .
  5. Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement
1 Front Fender Upper Bolt
CAUTION:

Refer to Fastener Caution .

2 Front Fender Bracket Bolt (Qty: 7)
Tighten 
10 N.m (89 lb in)
3 Front Fender