Hazard Warning Switch Replacement

Fig 1: Hazard Warning Switch

GM2888400

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Acadia)Instrument Panel Accessory Trim Plate Replacement (Enclave)Instrument Panel Accessory Trim Plate Replacement (Traverse) .

1

Hazard Warning Switch Fastener (Qty: 2)

CAUTION:

Refer to Fastener Caution .

2

Hazard Warning Switch

Procedure

Disconnect the electrical connector.
After replacing the hazard warning switch, remove the instrument panel cluster fuse for a few seconds and then install the fuse.