Instrument Cluster Replacement (Traverse)

Fig 1: Instrument Cluster (Traverse)

GM2876207

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedure
Remove the instrument panel cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Replacement (Acadia)Instrument Panel Cluster Trim Plate Replacement (Enclave)Instrument Panel Cluster Trim Plate Replacement (Traverse) .

1

Instrument Cluster Screw (Qty: 4)

CAUTION:

Refer to Fastener Caution .

2

Instrument Cluster Assembly

Procedures

Disconnect the electrical connections.
After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
Refer to Control Module References for programming and setup information.