|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat . Refer to 3rd Row Seat Removal and Installation
.
- Remove the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement (TB4) .
- Disconnect the liftgate actuator rod from the liftgate. Refer to Liftgate Actuator Rod Replacement
.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to 3rd Row Seat Retractor Side Belt Replacement
.
- Remove the liftgate door sill plate. Refer to Liftgate Door Sill Plate Replacement (Acadia) .
|
| 1 |
Cargo Tie Down Loop Bolt Cap (Qty: 2) |
| 2 |
Cargo Tie Down Loop Bolt (Qty: 2)
Tighten
3 N.m (27 lb in) |
| 3 |
Cargo Tie Down Loop (Qty: 2) |
| 4 |
Body Side Trim Panel Armrest
Procedure
Pull upward on the armrest to disengage the retainer clips. |
| 5 |
Cargo Screen Retainer Assembly (Qty: 2) Procedure
- Turn the left front and right rear cargo screen retainer counterclockwise one quarter turn to disengage the 2 integral tabs.
- Turn the left rear and right front cargo screen retainer clockwise one quarter turn to disengage the 2 integral tabs.
|
| 6 |
Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten
3 N.m (27 lb in) |
| 7 |
Rear Quarter Lower Trim Panel Assembly Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
|