LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2015 >> Acadia SLT, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Ignition and Start Switch Housing Replacement

Ignition and Start Switch Housing Replacement

Fig 1: Identifying Ignition & Start Switch Housing
GM1866492Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the turn signal switch bracket. Refer to Turn Signal Switch Bracket Replacement .
1 Ignition and Start Switch Housing Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
8 N.m (71 lb in)
2 Ignition and Start Switch Housing Strap
3 Ignition and Start Switch Housing

Procedure

  1. Disconnect any electrical connectors as needed.
  2. Transfer any parts as needed.
scientia non olet · About LEMON Manuals