LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2014 >> Acadia SLE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Replacement (Traverse)

Hood Replacement (Traverse)

Fig 1: Hood (Traverse)
GM2890640Courtesy of GENERAL MOTORS COMPANY
Hood Replacement (Traverse)

Callout Component Name

Preliminary Procedures

  1. Disconnect the windshield washer hose.
  2. Disconnect the hood struts.
1 Hood Hinge Bolt (Qty: 4)
CAUTION: Refer to Fastener Caution .

Procedure 
Mark the hood or hinge position in order to aid in hood installation.
Tighten 
22 (16 lb ft)
2 Hood

Procedure

  1. Remove the hood from the vehicle with the aid of an assistant.
  2. Transfer parts as needed.
  3. Adjust the hood if needed. Refer to Hood Adjustment (Traverse) .
scientia non olet · About LEMON Manuals