Instrument Cluster Replacement (With RPO SLT)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement (with RPO SLT) or Instrument Cluster Trim Panel Replacement (without RPO SLT) . |
|
| 1 | Instrument Panel Cluster Screws (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb in) |
| 2 | Instrument Panel Cluster Assembly Tip: A replacement cluster must be programmed. Refer to Control Module References . |