LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Yukon Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1546 (Interior Trim System And Paneling) >> Repair Instructions >> Rear Window Lower Garnish Molding Replacement (Regular Cab)

Rear Window Lower Garnish Molding Replacement (Regular Cab)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Window Lower Garnish Molding (Regular Cab)
GM1714408Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Rear Window Lower Garnish Molding Assembly
Tip: 
  1. Remove the front and rear seat belt guide covers.
  2. Ensure webbing is routed through guide loop.
  3. Route belt webbing through garnish molding.
  4. Drop garnish molding over guide loop and then secure.
2 Rear Window Lower Garnish Molding Retainer Clip (Qty: 14)
scientia non olet · About LEMON Manuals