LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Yukon Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1542 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Adjuster Track Finish Cover Replacement

Front Seat Adjuster Track Finish Cover Replacement

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Adjuster Track Finish Cover
GM1679194Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Front Seat Adjuster Finish Cover (Qty: 2)
Tip:  The 2 side covers snap into place.
2 Inner Adjuster Track Front Finish Cover
Tip:  When re-installing the finish cover, check the retainer for damage. If the retainer is damaged, reinsert a new retainer into the finish cover before installation.
Tip:  The inboard front cover snaps into place.
3 Inner Adjuster Track Rear Finish Cover
Tip:  The inboard rear cover snaps into place.
4 Front Seat Adjuster Finish Cover
Tip:  The seat belt cover snaps into place.
scientia non olet · About LEMON Manuals