Rear Quarter Upper Trim Panel Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Quarter Upper Trim Assembly

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement . Disable the SIR system. Refer to SIR Disabling and Enabling .
1	Screw Cover Plate
2	Rear Quarter Upper Trim Panel Screw NOTE: Refer to Fastener Notice . Tighten: 3 N.m (27 lb in)
3	Rear Quarter Upper Trim Panel Procedure Remove the seat belt anchor bolt. Disconnect the seat belt through the slot in the escutcheon opening.