LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2013 >> Yukon Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1088 (Interior Trim And Paneling) >> Repair Instructions >> Assist Handle and Rear Coat Hook Replacement

Assist Handle and Rear Coat Hook Replacement

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View of Assist Handle Rear Coat Hook Assembly
GM1962382Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Roof Rail Rear Assist Handle Screw (Qty: 2)
NOTE: Refer to Fastener Notice .

Procedure

  1. Fold the assist handle downward and hold.
  2. Use a small flat-bladed tool to open the assist handle covers to access the screws.

Tighten:  6 N.m (53 lb in)

2 Roof Rail Rear Assist Handle