Pinion Shaft Seal: Remove & Replace
WARNING: This page is about the Yukon Base, 4WD, which is a different variant/trim than selected.
CARRIER TYPE
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Front | 1.5 | B | ||
| Additional Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| Where Skid Plate interferes add | 0.3 | B | ||
| Combination Procedure: SPACER CRUSH SLEEVE: Replace: | ||||
| 3.6 | B | |||